Xerox Phaser 7800 User Manual Download

Page: 272 / 336

Troubleshooting

272

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer

User Guide

Troubleshooting Paper Jams

This section includes:

•

Multiple Sheets Pulled Together .................................................................................................................................. 272

•

Jams in the Document Feeder ...................................................................................................................................... 272

•

Paper Misfeeds and Paper Size Jams ........................................................................................................................ 273

•

Label and Envelope Misfeeds ....................................................................................................................................... 273

•

Paper Jam Message Stays On ....................................................................................................................................... 274

•

Jams During Automatic 2-Sided Printing ................................................................................................................ 274

Multiple Sheets Pulled Together

Probable Causes

Solutions

The paper tray is too full.

Remove some of the paper. Do not load paper past fill line.

The edges of the paper are not even.

Remove the paper, align the edges, and then reload it.

The paper is moist from humidity.

Remove the paper from the tray, and replace it with new dry paper.

Too much static electricity is present.

•

Try a new ream of paper.

•

Do not fan transparencies before loading in tray.

Using unsupported paper.

Use only Xerox approved paper. For details, see

Supported Paper

page 50.

Humidity is too high for coated paper.

Feed paper one sheet at a time.

Jams in the Document Feeder

Probable Causes

Solutions

Unsupported paper of the wrong size,

thickness, or type.

Use only Xerox-approved paper. For details, see

Supported Paper

page 50.

Originals are torn, previously stapled, bent, or

folded.

Ensure that the originals are not torn, bent, or folded. If previously

stapled, remove all staples and separate the sheets by fanning

them.

The documents loaded in the document

feeder exceed the maximum capacity

allowed.

Place fewer documents in the document feeder.

Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the paper loaded in

the document feeder.

Summary of Contents for Phaser 7800

















































































































































































































































































































































Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands

Xerox Phaser 7800, User Manual

Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands