Phaser® 7300 Color Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved.
12
Specialty Printing
This section covers:
■
Automatic 2-sided printing — see page 12.
■
Manual 2-sided printing — see page 14.
■
Transparencies — see page 19.
■
Envelopes — see page 22.
■
Labels, Business Cards, Greeting Cards, CD/DVD Inserts, and CD/DVD Labels —
see page 24.
For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,
refer to the
Supported Papers
section of the
Trays and Paper Guide
on the
Interactive Documentation
CD-ROM
.
Caution
Automatic 2-sided printing
To have the printer do automatic 2-sided printing (duplexing):
■
The printer must have a duplex unit installed.
■
The paper must be loaded in a tray. The printer will NOT do automatic 2-sided printing on paper
loaded in the Multi-Purpose Tray.
■
The paper must have a weight of 75-105 g/m
2
(20 - 28 lb. bond).
■
The paper size must be A5 or larger. The printer will NOT do automatic 2-sided printing on paper
smaller than 148 x 210 mm (5.83 x 8.27 in.).
■
The paper type must be
Plain Paper
,
Letterhead
, or
Special
.
Caution
DO NOT use any specialty media (such as glossy coated paper), envelopes, or labels for
automatic 2-sided printing. Any damage caused by duplexing specialty media may not be
covered under your printer warranty.
For best results with automatic 2-sided printing, do not use heavy toner coverage on the even-numbered
pages of your print job.
When you print any job, you can use the printer driver to select the orientation of the images on the
page:
Portrait
or
Landscape
. When you print 2-sided jobs, you also select the binding preference,
which determines how the pages turn; refer to the table on page 14 for the wording used in the printer
drivers for binding preference.
You MUST set the paper type and size in the
printer’s
front panel
any time you add paper to
the printer.
If you change paper sizes or types,
take a moment to ensure that the front panel
values agree with your paper choice.
If you fail
to do this, you can damage the printer’s fuser.
OK
6200-45
