UNIX (Linux)
Phaser® 6300/6350 Color Laser Printer
4-28
UNIX (Linux)
This section includes:
■
Quick Install Steps
on page 4-28
■
Additional Resources
on page 4-29
Your printer supports connection to a variety of UNIX platforms through the network
interface. The workstations currently supported by CentreWare for UNIX/Linux to a network-
connected printer are:
■
Sun Solaris
■
IBM AIX
■
Hewlett-Packard HP-UX
■
DEC UNIX
■
Linux (i386)
■
Linux (PPC)
■
SGI IRIX
The following procedures enable you to connect your printer using any of the supported
versions of UNIX or Linux listed above.
Quick Install Steps
Perform the following procedures to set up the printer and install the appropriate drivers.
From the Printer
To set up the printer:
1.
Verify that both TCP/IP protocol and the proper connector are enabled.
2.
On the control panel, select one of these IP address options:
■
Allow the printer to set up a DHCP address.
■
Enter the IP address manually.
3.
Print the Configuration page and keep it for reference.
From Your Computer
To install the printer:
1.
Go to
www.xerox.com/office/drivers
.
2.
Select your printer, the platform you are running (
UNIX
), and file type (
Drivers
).
3.
Click
Go to Downloads
.
4.
From the list of files provided, download the
PrinterPackageXPXX
and the file that
matches your operating system.
5.
Print a test page and verify the print quality of the printed page.
