Macintosh
Phaser® 6300/6350 Color Laser Printer
4-20
Macintosh
This section includes:
■
Requirements
on page 4-20
■
Quick CD-ROM Install Steps
on page 4-20
■
Enabling and Using EtherTalk for Mac OS 9.x
on page 4-20
■
Enabling and Using TCP/IP for Mac OS 9.x
on page 4-21
■
Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version 10.2 and Higher
on
page 4-23
■
Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Version 10.2 and Higher)
on
page 4-25
Requirements
■
A workstation with the appropriate printer driver installed.
■
A working knowledge of the operating system (Mac OS 9.x or Mac OS X, version 10.2 or
higher) being used on the workstation.
■
Proper cabling to connect the printer to the network.
Quick CD-ROM Install Steps
To use the quick CD-ROM installation option:
1.
Insert the
Software and Documentation CD-ROM
into the computer’s CD-ROM drive.
2.
Double-click the installer on the
Software and Documentation CD-ROM
to install the
printer driver.
Enabling and Using EtherTalk for Mac OS 9.x
If you use EtherTalk, Macintosh computers do not require IP addresses.
To create a desktop printer:
1.
Open the
AppleTalk Control Panel
. Verify that the Ethernet port is the selected network
port.
2.
Open the
Chooser
, and then click the
LaserWriter printer
driver.
3.
Select the printer.
4.
Click
Create
to create the desktop printer.
