![background image](http://html2.mh-extra.com/html/xerox/phaser-6180mfp/phaser-6180mfp_features-setup-manual_4047426004.webp)
Phaser® 6180MFP Multifunction Printer
EN - 2
Installing the Windows Printer Driver over Ethernet (Network)
Installing the Windows Printer Driver over
Ethernet (Network)
1.
Ensure the printer is turned on and connected to your network.
2.
Insert the
Software and Documentation CD-ROM
into your
computer’s CD-ROM drive. The installer starts automatically.
3.
Click the
Language
button and select your language from the list.
4.
Click
Install Printer Driver
.
5.
Select
I Agree
if you accept the Xerox License Agreement.
6.
Select your
Phaser 6180MFP Multifunction Printer
from the list
of available printers, and then click the
Install
button.
7.
If your printer was not in the list, type the printer’s IP address
directly into the
Enter Printer’s IP address
field, and then click
the
Install
button.
8.
Print a test page to verify the installation was successful.
Installing PrintingScout Software
1.
Click
Install Utilities
.
2.
Click
Install PrintingScout
, and then click
Next
.
3.
Select your language, and then click
Next
.
4.
When asked to continue, click
Next
.
5.
Select
I Accept
if you accept the Xerox License Agreement, and
then click
Next
.
6.
Choose the destination folder, and then click
Next
7.
Verify the folder installation path, and then click
Next
.
8.
When the installer finishes, click
Finish
.
Continue with the section
Setting Up the Printer Features Connecting
over Ethernet (Network)
on page 5.