Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
32
Connecting the Printer
This section includes:
•
Choosing a Connection Method
on page 32
•
Connecting via a Network
on page 32
•
Connecting via USB
on page 33
Choosing a Connection Method
The printer can be connected to your computer via a USB cable or an Ethernet cable. The method you
choose depends on whether or not your computer is connected to a network. A USB connection is a
direct connection, is not used for networking, and is the easiest to set up. An Ethernet connection is
used for networking. There are many ways that printers and computers can be connected on a
network, so if you are going to use a network connection, you will need to know how your computer is
connected to your network (for example, via a router connected to a cable or DSL modem). For more
information, see
About TCP/IP and IP Addresses
on page 34.
Note:
Hardware and cabling requirements vary for the different connection methods. Routers,
network hubs, network switches, modems, Ethernet and USB cables are not included with your
printer and must be purchased separately.
•
Network
: If your computer is connected to an office network or a home network (whether a hard
connection or wireless), you will use an Ethernet cable to connect the printer to the network instead
of directly to the computer. An Ethernet network can be used for one or more computers and
supports many printers and systems simultaneously. An Ethernet connection is recommended
because it is faster than a USB connection and it allows you direct access to the printer’s settings
via CentreWare IS.
•
USB
: If you are connecting the printer to one computer and do not have a network, you will use a
USB connection. While a USB connection offers fast data speeds, it is not as fast as an Ethernet
connection and does not provide access to CentreWare IS. To use USB, PC users must have
Windows 2000/XP/Server 2003 or newer. Macintosh users must use Mac OS X, version 10.3 and
higher.
Connecting via a Network
To connect the printer to a network:
1. Make sure the printer is turned off.
2. Attach an Ethernet RJ-45 cable from the printer to the network or router socket. You will need an
Ethernet hub, or a DSL or Cable router (direct or wireless), and two or more twisted-pair Ethernet
RJ-45 cables (one cable for each device). To connect using an Ethernet hub or router, first connect
the computer to the hub/router with one cable and then connect the printer to the hub/router with
the second cable. Connect to any port on the hub/router except the uplink port.
3. Attach the power cord and then plug in the printer and turn it on. For safety information, see
Power
Cord
on page 10.
4. You will need to manually set or automatically discover the printer’s IP (network) address. Go to
Assigning the Printer’s IP Address
on page 34.
Summary of Contents for PHASER 6140
