Xerox PHASER 6130, Service Manual

Page: 120 / 454

3-18 Phaser 6130 Color Laser Printer Service Manual
Error Messages and Codes
MCU Errors
024-340 MCU Firmware Err
Restart Printer
Error 024-340
Restart Printer
024-340
Code: XX
<IOT Firmware Error>
Firmware error occurs.
Shows detail of error code when
pressing three keys “Down
arrow”, “Up arrow”, and “OK”.
024-340
Code: XX
01: Task Over/
02: Time Over/
03: NV Write Retry/
04: NV Write Queue Over/
05: LEISUS Send Over/
06: CRUM Data/
07: Pursuit Comp/
08: Pursuit SUM/
09: Fuser NV/
0A: Dispense/
0B: FSR SBY Mode/
0C: Media ERR2/
0D: Hanpa/
0E: FSR SBY Mode/
0F: FSR Print Mode/
10: Continuous Heater/
11: PPM Group ERR/
12: CMODE ERR/
13: Send CMD ERR
page 3-74
041-340 MCU NVRAM Error
Restart Printer
Error 041-340
Restart Printer
ADDR: XXXX
Data: XX
<IOT NVRAM Error>
IOT NVM Error occurs.
Shows detail of error code and
address when pressing three keys
“Down arrow”, “Upper arrow”,
and “OK”.
ADDR: XXXX
Data: XX
1000 to 17FF: MCU PWBA/
3000 to 30FF: Transfer Belt/
3100 to 31FF: Yellow Toner
Cartridge/
3200 to 32FF: Magenta Toner
Cartridge/
3300 to 33FF: Cyan Toner
Cartridge/
3400 to 34FF: Black Toner
Cartridge
page 3-75
Error Message and Chain Link Code Display (continued)
Chain Link
Code
Control Panel
Message
Error Contents
Go to
Page
Scroll
Scroll
Scroll
Scroll