Maintenance
90
Xerox
®
Phaser
®
6022 Printer
User Guide
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to the
Maintenance Menu
, then press
OK
.
4.
Select
Adjust Fusing Unit
, then press
OK
.
5.
To select the paper type for the adjustment, use the
Up
or
Down
arrow buttons, then press
OK
.
6.
To increase or decrease the amount of offset, press the arrow buttons, then press
OK
.
7.
Repeat this procedure for each paper type you need to adjust.
8.
To return to the main menu, press the
Return
button.
Refreshing the Bias Transfer Roller
Use the BTR Refresh procedure to reduce paper curling and improve paper discharge.
To refresh the bias transfer roller:
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to the
Maintenance Menu
, then press
OK
.
4.
Select
BTR Refresh
, then press
OK
.
5.
Select
On
, then press
OK
.
6.
To return to the main menu, press the
Return
button.
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to the
Maintenance Menu
, then press
OK
.
4.
Select
Adjust Altitude
, then press
OK
.
5.
To select the altitude of the location of the printer, press the arrow buttons, then press
OK
.
6.
To return to the main menu, press the
Return
button.