Installation and Setup
52
Xerox
®
Phaser
®
6022 Printer
User Guide
Configuring the Low Toner Alert Message
You can configure the printer to alert you when toner levels are low.
1.
At the printer control panel, press the Menu button.
Note:
To navigate through the menu, use the up or down arrow buttons.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to
System Setup
, then press
OK
.
4.
Navigate to
LowTonerAlertMsg
, then press
OK
.
5.
To select a setting, press the arrow buttons, select it, then press
OK
.
Configuring the Control Panel Timeout
You can use Auto Reset to set the delay before the printer control panel times out.
1.
At the printer control panel, press the Menu button.
Note:
To navigate through the menu, use the up or down arrow buttons.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to
System Setup
, then press
OK
.
4.
Navigate to
Auto Reset
, then press
OK
.
5.
To select a setting, press the arrow buttons, select it, then press
OK
.
Configuring the Fault Timeout
The fault timeout allows you to set how long the printer waits before canceling a print job that stops
abnormally.
1.
At the printer control panel, press the Menu button.
Note:
To navigate through the menu, use the up or down arrow buttons.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to
System Setup
, then press
OK
.
4.
Navigate to
Fault Timeout
, then press
OK
.
5.
To select a setting, press the arrow buttons, select it, then press
OK
.
Configuring the Job Timeout
Job Timeout allows you to set how long the printer waits for data to arrive from a computer.
1.
At the printer control panel, press the Menu button.
Note:
To navigate through the menu, use the up or down arrow buttons.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to
System Setup
, then press
OK
.
4.
Navigate to
Job Timeout
, then press
OK
.
5.
To select a setting, press the arrow buttons, select it, then press
OK
.