(g) Color coding shall not be
used as the only means of
conveying information,
indicating an action, prompting
a response, or distinguishing a
visual element.
Supports
Color coding and additional means of unique
identification (e.g., text and symbols) are used.
(h) When a product permits a
user to adjust color and contrast
settings, a range of color
selections capable of producing
a variety of contrast levels shall
be provided.
Not applicable
There are no color contrast settings.
(i) Products shall be designed to
avoid causing the screen to
flicker with a frequency greater
than 2 Hz and lower than 55 Hz.
Supports
The flash rate of any flashing elements does not fall
between 2 Hz and 55 Hz.
(j) (1) Products which are
freestanding, non-portable, and
intended to be used in one
location and which have
operable controls shall comply
with the following: The position
of any operable control shall be
determined with respect to a
vertical plane, which is 48
inches in length, centered on
the operable control, and at the
maximum protrusion of the
product within the 48 inch
length on products which are
freestanding, non-portable, and
intended to be used in one
location and which have
operable controls.
Not applicable
The Phaser™ 4500 is a portable device and can be
placed on a table of any height.
(j)(2) Products which are
freestanding, non-portable, and
intended to be used in one
location and which have
operable controls shall comply
with the following: Where any
operable control is 10 inches or
less behind the reference plane,
the height shall be 54 inches
maximum and 15 inches
minimum above the floor.
Not applicable
The Phaser™ 4500 is a portable device and can be
placed on a table of any height.
www.xerox.com/section508
Page 8 of 11
Last Revision: 4/2/2004
