![background image](http://html.mh-extra.com/html/xerox/phaser-3450/phaser-3450_service-manual_885513050.webp)
5-22
Disassembly and Reassembly
Service Manual
5.22 MP Pick-up Ass’y
1. Before you remove the MP Pick-up Ass’y, you should
remove:
- MPF Ass’y (Refer to the 5.3)
- Main Drive Ass’y (Refer to the 5.7)
- Top Cover (Refer to the 5.13)
- Inner Cover (Refer to the 5.15)
2. First of all remove two screws. Lift up the MP
Pick-up Shaft for taking out the MP Pick-up
Rack.
3. Remove the E-Rings on both ends of Gear
Ass’y and remove Ass’y as shown below.
4. Pull and remove the lock equipment, then rotate
the Bearing as shown below.
5. Slide the cam to the left by pulling on the MP
Pick-up shaft
MP Pick Up
Rack
Rack
Bearing
Cam
MP Pick Up Shaft
E-Ring
Gear Ass’y
Summary of Contents for Phaser 3450
