Xerox PHASER 3435, Service Manual

Page: 234 / 247

General Procedures and Information
6-48 5/08 Phaser 3435
GP 10 Parts Life Cycle Maintenance Table
Print Cartridge
1. Print Cartridge Main Defects
- White Point, Black Point: White or Black point on printing image
- Image contamination: Dirty printing image
- Image Fainted: Entire Image is fainted and vertical white line emerge
- Black Line: Vertical black line emerge on printing image
2. Defect Symptoms
Supplies Life Cycle Condition
Engine
Condition
LCD
Indication
Customer
Panel
Manage
Responding
Print Car-
tridge 4K: For Prod-
uct Toner Low Warning Ready Low
Toner - 10% Remains
10K: For Sale Toner Empty Warning Ready Toner - Initialized at toner
change
Toner unin-
stalled
Fuser 80K(page):
Simplex
Exhausted No Indication No Indication Replaced at
Exhausted
Transfer
Roller 70K(page):
Simplex Exhausted No Indication No Indication Replaced at
Exhausted
PickUP Roller 150K(page):
Simplex
Exhausted No Indication No Indication Replaced at
Exhausted
Symptoms Criterion Remarks
White, Black Point Clean Up OPC (10 times), if disappeared, no failure.
- If continuous, failure
System Setup ->
Maintenance-> Clean Drum
Image contamina-
tion (Toner leak-
age) Dirty printing image or contaminated reverse side
- Clean up OPC (10 times) and inside of machine with cloth, if
disappeared, no failure.
Image Fainted After shake cartridge right and left 5~6 times, if printing image is
not fainted, no failure. (Toner Exhausted)
Vertical Black Line Vertical thin line emerge, if cartridge is scratched.
- (Customer fault)