Printing
_ 45
Configuring printer properties
Using the
Printer Properties
window provided by the
Printers
configuration
, you can change the various properties for your machine as
a printer.
1.
Open the
Unified Driver Configurator
.
If necessary, switch to
Printers configuration
.
2.
Select your machine on the available printers list and click
Properties
.
3.
The
Printer Properties
window opens.
The following five tabs display at the top of the window:
•
General:
This option allows you to change the printer location and
name. The name entered in this tab displays on the printer list in
Printers configuration
.
•
Connection:
This option allows you to view or select another port. If
you change the machine port from USB to parallel or vice versa
while in use, you must re-configure the machine port in this tab.
•
Driver:
Allows you to view or select another printer driver. By
clicking
Options
, you can set the default device options.
•
Jobs:
This option shows the list of print jobs. Click
Cancel job
to
cancel the selected job and select the
Show completed jobs
check
box to see previous jobs on the job list.
•
Classes:
This option shows the class that your machine is in. Click
Add to Class
to add your machine to a specific class or click
Remove from Class
to remove the machine from the selected
class.
4.
Click
OK
to apply the changes and close the
Printer Properties
window.
Summary of Contents for Phaser 3160B
Page 1: ......
Page 6: ...table of contents Table of contents_ 6 GLOSSARY 67 ...
Page 71: ...Glossary_ 71 ...