Xerox Phaser 3100MFP, Service Manual

Page: 22 / 243

Status Indicator RAPs
2-4 04/08 Phaser 3100 MFP
0A No document to recover You have attempted to recover a document
from a correspondent, but the latter has not
stored the document or the password that
was entered is wrong. Contact your corre-
spondent to check
whether the document to
recover has been stored
or to check the validity of
the password.
0B Wrong number of pages There is a difference between the number
of pages indicated when the document was
stored for transmission and the number of
pages actually transmitted. Check the number of
pages of the document.
0C Received document faulty. The document is too long to be received in
its entirety. Ask the correspondent to
check/reduce the length
of his document.
0D Document transmission fault Document reception error. Ask the correspondent to
retransmit his document.
13 Memory full The machine memory is full (there are too
many documents that have been received
but not yet printed, or waiting to be trans-
mitted). Print the received docu-
ments. Delete or transmit
in immediate mode the
documents waiting to be
transmitted.
14 Memory full Received document memory saturated. Print the received docu-
ments.
16 List number x not retransmitted Failure to retransmit a document via a
remote fax (the requested list of recipients
is not programmed on the remote fax). Check that the list of
recipients is programmed
on the remote fax.
19 Stopped by correspondent Communication stopped by your corre-
spondent (Example: a machine attempts to
recover a document from your machine,
and there is no document waiting for this
correspondent).
1A Disconnect Transmission has not started (the phone
line is too noisy). Check the quality of the
phone line or restart the
transmission at a later
time.
Table 1: