Xerox 4590 EPS/4110 EPS Getting Started
1-10
1. Overview
Power off
Perform the following to power off the machine:
1. Before switching off the power ensure that all print jobs have
completely finished. Furthermore, ensure that the
<Online>
indicator is not lit.
CAUTION:
Switching off the power before print jobs are
complete loses any data that is being processed.
CAUTION:
Never switch off the power while data is being
received and/or jobs are being printed.
2. Press the power switch to the Off position [ ].
CAUTION:
The power off process continues internally after the
power switch is turned off. Therefore, do not immediately unplug
the power cord from the power outlet.
NOTE: If you have switched off the power, wait ten seconds
before switching on the power again.
About the circuit breaker
This product is equipped with a circuit breaker. The circuit breaker
is normally set to the
On
(“
l
”) position as shown in the following
figure.
If power to the machine is interrupted, the circuit breaker trips and
the switch is set to the
Off
(“
O
”) position.
NOTE: If the breaker is in the Off (“O”) position, contact your
Customer Support Center as there might be some unusual
conditions.