Xerox 4590 EPS/4110 EPS System Administration Guide
5-6
5. Safety and Notices
Operational safety
Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
Your attention to the following safety guidelines will help ensure
the continued safe operation of your product:
•
Use the materials and supplies specifically designed for your
product. The use of unsuitable materials may result in poor
performance of the machine and possibly a hazardous
situation.
•
Follow all warnings and instructions that are marked on or
supplied with the machine.
•
Place the machine in a room that provides adequate space for
ventilation and servicing.
•
Place the machine on a level, solid surface (not on a thick pile
carpet) that has adequate strength to support the weight of the
machine.
•
Do not attempt to move the machine. A leveling device that
was lowered when your machine was installed may damage
the carpet or floor.
•
Do not set up the machine near a heat source.
•
Do not set up the machine in direct sunlight.
•
Do not set up the machine in line with the cold air flow from an
air conditioning system.
•
Do not place containers of coffee or other liquid on the
machine.
•
Do not block or cover the slots and openings on the machine.
•
Do not attempt to override any electrical or mechanical
interlock devices.
WARNING:
Be careful when working in areas identified with this
warning symbol. These areas may be very hot and should not be
touched.
If you need any additional safety information concerning the
machine or materials, contact your Xerox representative.
