Xerox 4590 EPS/4110 EPS System Administration Guide
4-46
4. Setups
Data restoration
KEY POINT:
The enciphered data cannot be restored if any of the
following occur:
•
When there is a physical hard disk error
•
When you cannot remember the encryption key
Start data encryption
and/or changing the
settings:
When data encryption is started or ended and when the encryption
key is changed, the machine
must be restarted
. The
corresponding recording area of the hard disk is reformatted when
the machine restarts. Previous data is not guaranteed.
The recording area stores the following data:
•
Spooled print data
•
Forms for the form overlay feature
KEY POINT:
Save all necessary settings and documents before
using the data encryption feature or changing its settings.
Software download
While this feature may still be accessible, it is not supported. This
feature is
only
for service representative use. Contact the
Customer Support Center. Select
Disabled
as the default setting.
Estimated job time
Select the default setting that is displayed for the estimated job
completion time.
•
Cumulative time for all jobs:
Select this option if you want
the machine to display the total time for all jobs.
•
Time required for a single job:
Select this option if you want
the machine to display the time required for a single job.
6.
For
HTTP - SSL/TLS Communication,
select
Disabled
or
Enabled
to enable or disable
HTTP-SSL/TLS
Communication
. If enabled, data encryption between the
machine and networked computers is allowed.elect.
