Xerox FreeFlow version 6.0, System Manual

Page: 94 / 112

7 - 1 6
System Guide
Troubleshooting
NOTE: This procedure performs the file check and takes
about one minute. The # symbol appears again.
If there are problems starting the software, check the console
window for messages.
Loading XJDC/Unix
The Xerox Job Description Compiler is loaded by entering the
following on the command line:
/opt/XRXnps/bin/XJDC [-option[,option...]] <filename> ..
The filename is the name of the JSL file that is to be compiled.
The JSL filename is required to terminate with the suffix.jsl or
.JSL. The filename may contain path information.
Many options may be specified and shown in the above example.
The options may be specified in any order and are 3-character
abbreviations. A list of the available options and their
abbreviations are as follows:
• REPlace / NOReplace: Replace or backup existing PDL object
files.
• DISplay / NODisplay: Display or suppress XJDC messages.
• PRInt / NOPrint Generate: JSL compilation listing always or
only when errors/warnings occur.
• TRUncate / NOTruncate: Truncate or accept JSL source lines
after 72 characters.
• LABel / NOLabel: Generate or suppress 128-byte Xerox
standard label.
• COMpile / SCAn: Compile with output or scan only.
• SINglebyte / DOUblebyte: Use singlebyte or doublebyte code
and printer carriage control translation files.
• Vx: LPS PDL version number, x = 10, 2, 35, 3615, 37, 38, 39,
40, 50, 3A, M10.
• PAPersizes: Paper size to use for PDL VM10, s = USLEGAL /
USLETTER / A4.
• DATed = d: Date format, d = US / EUROPEAN.
• PAGinate = p: Lines per page, n = 0, 5 to 999 (0 means no
pagination).
• OUTpath=p: Base directory for output files, p = <path>,
default is current directory (Note that ~ is not supported.).