Xerox DP N24, System Administrator Manual

Page: 77 / 336

Main Menu
Chapter 3: Using the Control Panel
❖
3-13
Main Menu
The Main Menu is a system of submenus, each containing options
designed to configure the printer for your environment. The Main
Menu hierarchy is depicted in Table 3.4.
In this chapter, a boldfaced value for a menu item indicates that value is
a factory setting. A value followed by an asterisk (*) indicates the
factory default for that value. See the section “Reset Menu” (page 3-87)
for information on how to revert to factory settings.
Table 3.4 Main Menu hierarchy
Main Menu Hierarchy and Factory Settings
Job Menu See “Job Menu” (page 3-14).
Password Menu
1
See “Password Menu” (page 3-16).
Tray Menu See “Tray Menu” (page 3-19).
PCL Menu See “PCL Menu” (page 3-26).
PostScript Menu See “PostScript Menu” (page 3-31).
System Menu See “System Menu” (page 3-33).
Parallel Menu See “Parallel Menu” (page 3-42).
Serial Menu See “Serial Menu” (page 3-45).
Ethernet Menu See “Ethernet Menu” (page 3-48).
Token Ring Menu
2
See “Token Ring Menu” (page 3-61)
Novell Menu
3
See “Novell Menu” (page 3-75).
Test Menu See “Test Menu” (page 3-82).
Reset Menu
4
See “Reset Menu” (page 3-87).
1
Appears only when the Hard Disk Drive is installed.
2
Appears only when the Token Ring Card is installed in the printer.
3
Appears only when Novell is enabled from the Ethernet or Token Ring Menu.
4
Appears only when On Line and Enter are simultaneously held down at power ON.