Xerox DP N24 System Administrator Manual Download Page 146

Page: 146 / 336

Test Menu

3-82

❖

DP N24, N32 and N40 System Administrator Guide

Test Menu

Test Menu options are used to generate printer reports. All options
other than Restart Printer cause the printer to generate a printed
report.

Figure 3.13 shows the Test Menu hierarchy. Tasks performed with
the Test Menu are listed in Table 3.16 on page 3-83.

Figure 3.13

Test Menu hierarchy

Job Menu

Password Menu

Tray Menu

PCL Menu

PostScript Menu

Config Sheet

System Menu

Demo Page

Parallel Menu

PCL Font List

Serial Menu

PS Font List

Ethernet Menu

Test Print

Token Ring Menu

Menu Map

Novell Menu

Disk Directory

Appears only when the optional Hard Disk Drive is installed.

Test Menu

Hex Mode

Reset Menu

Restart Printer

When Enter

is pressed, the selected report will print.

Summary of Contents for DP N24

















































































































































































































































































































































Search results

Summary of Contents for DP N24

Reviews:

Xerox DP N24, System Administrator Manual, Page: 146 / 336

Search results

Summary of Contents for DP N24

Reviews: