Xerox DocuPrint N4025, Information Manual

Page: 26 / 124

Set An IP Address
2-12
❖
DocuPrint Technical Information Guide
5
Open a telnet session by typing
telnet name[Enter]
.
Make sure that telnet is enabled on the
CentreDirect External Print Server (External
Ethernet Adapter) by examining the position of
the DIP switches which are located on the rear
panel. D1 should be in the up position and D2
should be in the down position. If you change the
position of the switches, make sure you cycle the
power off and on before proceeding.
6 When the telnet window appears, type ! [Enter]
(exclamation point) and then yes [Enter] to enter
monitor mode.
7
Type I[Enter] to enter the IP address. Enter the desired IP
address.
8
Reboot the network interface by typing R [Enter] .
When you reboot the network interface, you will
lose your telnet connection. Close the telnet
session window and open a new connection after
the network interface has rebooted.
When the Xerox CentreDirect External Print Server (External
Ethernet Adapter) acquires an IP Address, the SYS LED blinks
once per second. If the IP Address is not set the SYSLED blinks
5 times per second.