Xerox DocuPrint N24, Service Manual, Page: 3 / 1032

2/2000
DocuPrint N24, N32, N40, N3225, and N4025 iii Product Safety
Warning
This equipment complies with the
requirements in Part 15 of FCC rules for a
class A computing device. Operation of the
equipment in a residential area may cause
unacceptable interference to radio and TV
reception, requiring the operator to take
whatever steps are necessary to correct the
interference.
Electrostatic Discharge
This caution indicates that there are components
which are sensitive to damage caused by
electrostatic discharge.
Shock Hazard
This symbol indicates the presence of potentially
hazardous voltages.
Fuser Hazard
This symbol indicates the presence of extreme
heat from the Fuser Assembly.
CLASS 1 LASER PRODUCT
The DocuPrint N24, N32, N40, N3225, and N4025
laser printers are certified to comply with Laser
Product Performance Standards set by the U.S.
Department of Health and Human Services as a
Class 1 Laser Product. This means that this is a
class of laser product that does not emit
hazardous laser radiation; this is possible only
because the laser beam is totally enclosed during
all modes of customer operation.
The laser and output of the laser scanner unit
produces a beam that, if looked into, could cause
eye damage. Service procedures must be
followed exactly as written without change.
When servicing the machine or laser module,
follow the procedures specified in the manual and
there will be no hazards from the laser.
Laser (FDA): Any laser label visible to service
must be reproduced in the service manual with
location shown or indicated. Safe working
procedures and clear warnings concerning
precautions to avoid possible exposure must also
be included.
The Laser contained in the DocuPrint N24, N32,
N40, N3225, and N4025 meets the following
standard: Laser class 3B, maximum 5mW,
wavelength 780nm.
The following LASER symbol will be displayed at
the start of any procedure where possible
exposure to the laser beam exists.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
The DocuPrint N24, N32, N40, N3225, and N4025
have two laser warning labels. Refer to the
illustrations on the next two pages for the location
of the labels.
FM_001
FM_002
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.