Xerox DocuPrint N2025, Service Manual, Page: 131 / 378

02/2000
4-21 DocuPrint N2025/N2825
REP 3.5
Repair-Adjustment Initial Issue
REP 3.5 Tray 1 Right Guide Assembly
Parts List on PL 3.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover.
2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
3. Remove Tray 1.
4. Remove the Left Side Cover (REP 1.1).
5. Remove the Top Cover Assembly (REP 1.3).
6. Remove the Right Side Cover (REP 1.2).
7. Remove the MBF Assembly (REP 2.1).
8. Remove the Retard Chute Assembly (REP 3.1).
9. Remove Front Cover (REP 1.4).
10. Carefully push down on the locking tab that secures the rod to the paper level actuator
(Figure 1).
11. Remove the paper level assembly from the stud on the frame (Figure 1).
12. Move the paper level forward to unlatch then remove from the printer (Figure 1).
13. Remove the four screws that secure the Tray 1 Right Guide Assembly to the printer (Fig-
ure 2).
14. Use a small screwdriver to pry up on the locking tab that locks the guide assembly to the
bottom of the printer (Figure 2).
15. Remove the Tray 1 Right Guide Assembly.
Figure 1 Paper Level Indicating Arm
Figure 2 Tray 1 Right Guide Assembly
Replacement
1. Reinstall the components in the reverse order.