Xerox DocuPrint N2025, Service Manual

Page: 3 / 378

Electrostatic Discharge
DocuPrint N2025/N2825
02/2000
iii
Initial Issue
Electrostatic Discharge
This caution indicates that there are components which are
sensitive to damage caused by electrostatic discharge.
Shock Hazard
This symbol indicates the presence of potentially hazardous
voltages.
Fuser Hazard
This symbol indicates the presence of extreme heat from the
Fuser Assembly.
Class 1 LASER Product
The DocuPrint N2025/N2825 laser printers are certified to
comply with Laser Product Performance Standards set by the
U.S. Department of Health and Human Services as a Class 1
Laser Product. This means that this is a class of laser product
that does not emit hazardous laser radiation; this is possible only
because the laser beam is totally enclosed during all modes of
customer operation.
The laser and output of the laser scanner unit produces a beam
that, if looked into, could cause eye damage. Service procedures
must be followed exactly as written without change.
When servicing the machine or laser module, follow the
procedures specified in the manual and there will be no hazards
from the laser.
Laser (FDA): Any laser label visible to service must be
reproduced in the service manual with location shown or
indicated. Safe working procedures and clear warnings
concerning precautions to avoid possible exposure must also be
included.
The Laser contained in the DocuPrint N2025/N2825 meets the
following standard: Laser class 3B, maximum 5mW, wavelength
780nm.
The following LASER symbol will be displayed at the start of any
procedure where possible exposure to the laser beam exists.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.
FM_001