Xerox DocuPrint 96 IPS Series, System Overview Manual

Page: 49 / 101

PRINTERS
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE 4-7
Inverter
The inverter is part of the inverter feeder/stacker module. It allows for
proper collation of the print job. It also directs printed output to the
sample tray, when required.
Feeder/stacker modules
Each feeder/stacker module contains a high-capacity feeder tray and
a high-capacity stacker.
High-capacity feeder (HCF) tray This tray is located in the bottom half of the feeder/stacker module.
Each HCF tray can hold up to 2600 sheets of 20 pound or 80 gsm
paper.
The high-capacity feeder trays can handle paper sized from 8 by 10
inches/ 203 by 254 mm to 14 by 17 inches / 364 by 432 mm.
High-capacity stacker (HCS) This bin is located in the top half of the feeder/stacker module. Each
HCS can hold 2500 sheets of 20 pound or 80 gsm paper.
The 4635 and 180 printers may have up to four feeder/stacker
modules (including the inverter feeder/stacker), containing feeder
trays 3, 4, 5, and 6, and stacker bins A, B, C, and D. The 96 IPS can
have up to two feeder/stacker modules, containing feeder trays 3 and
4, and stacker bins A and B.
Processor feeder trays
Two processor feeder trays are located in the main part of the printer
and are not part of a feeder/stacker module.
•
The main tray (tray 1) holds up to 1100 sheets of 20 pound or
80 gsm paper.
•
The auxiliary tray (tray 2) holds up to 600 sheets of 20 pound or
80 gsm paper.
•
Trays 1 and 2 can handle paper sized from 8 by 10 inches / 203
by 254 mm to 9.02 by 14.02 inches / 230 by 356 mm.