Installation
Installation Planning Guide
2-8
DocuTech 65/DocuPrint 65
Telephone line requirments
NOTE: The telephone line for the Sixth Sense feature must be an analog
telephone line (not a digital telephone line).
•
The Sixth Sense connection requires either a dedicated analog telephone
line or a PhoneShare device to share an analog telephone line with up to
three other devices.
•
The telephone jack or PhoneShare device must be within the 14 ft. (4.25
m) length of the printer's telephone cord. If a PhoneShare device is used,
it must also be placed within the 25 ft. (7.6 m) length of the telephone cord
from the telephone jack, and within the 6 ft. (1.8 m) length of the power
cord from its assigned power receptacle.
Call the Xerox Welcome Center and provide the telephone number of this
line for entry into the Sixth Sense on-line support system. If a
PhoneShare device is used, also provide the port number on the
PhoneShare device that the printer is using.
Relocating the DocuTech 65/DocuPrint 65
Before relocating the DocuTech 65/DocuPrint 65, review the following
information:
•
In the previous chapter, Safety notes
•
In this chapter, Preparing a location for the DocuTech 65/DocuPrint 65
Relocation to a site on the same floor or to a different floor via an elevator can
be handled without assistance from Xerox. If you need to relocate to a
different building, contact Xerox.
Procedure
Use the following procedure to relocate your printer and controller:
•
Power-off the printer and unplug the telephone cord, power cord and any
network connections.
•
Power-off the peripherals, the modem, the CPU, and then the monitor
using the correct shutdown procedure.
•
Unplug the power strip from the wall.
•
Unplug the CPU, the monitor, the modem, and the peripherals from the
power strip.
•
Disconnect the CPU from the printer.
•
Disconnect the CPU from the monitor, keyboard, and mouse.
•
If the monitor, keyboard, and mouse are on the top of the printer, remove
them before moving the printer.
