Xerox DocuColor 7000AP User Manual Download Page 44

Page: 44 / 88

DocuColor 7000AP/8000AP User Guide

9-4

9. Maintenance

Cleaning the Paper Transport and Fusing areas

click

here

for video

WARNING:

If the digital press is switched on and

the fuser is hot, switch off the digital press power

and allow the Fuser to cool for 15 minutes.

Open the Front Doors and pull out the Paper
Transport Drawer using handle 4.

Clean the chute area with a lint-free cloth that
was supplied with the digital press (Xerox

Part Number: 19K03610).

Clean the Horizontal Transport Belts and the
surrounding area with a lint-free cloth that

was supplied with the digital press (Xerox

Part Number: 19K03610).

NOTE: Rotate the belts from left to right as you
continue to wipe them. Use the cloth to rotate them
as using your hands could leave grease or dirt and
create paper jams.

Clean the sensors with a lint-free cloth that
was supplied with the digital press (Xerox

Part Number: 19K03610).

Close the Paper Transport Drawer.

Summary of Contents for DocuColor 7000AP

























































































Search results

Summary of Contents for DocuColor 7000AP

Reviews:

Related manuals for DocuColor 7000AP

Brands by name

Popular brands

Xerox DocuColor 7000AP, User Manual

Search results

Summary of Contents for DocuColor 7000AP

Reviews:

Related manuals for DocuColor 7000AP

Brands by name

Popular brands