Xerox DocuColor 7000AP, User Manual

Page: 32 / 88

DocuColor 7000AP/8000AP User Guide 8-2
8. Optional Accessories
Bypass
The Bypass (only required when a second stacking
device is installed) transports collated sets through
the HCS80 to a connected finishing device or to
another HCS80.
If your system configuration has two stackers, the
bypass on the second stacker is not used.
Identifying the parts
HCS80 Control panel
1 Ready light
The Ready light blinks during initialization and is
constant when the HCS80 is in use or in standby
mode.
2 Sample set button
Press to have the HCS80 deliver the next collated
set to the top tray.
3 Unload button
Press once to lower the Stacker Tray and unlock
the front door.
4 Unload light
Illuminates when the Stacker Tray has reached the
down position and the front door can be opened.
5 Wait light
Blinks when the Stacker Tray is moving up or down.
6 Fault code display
Displays a code when a fault occurs in the
HCS80. Refer to the HCS80 fault code table
located in the Problem Solving section of this
chapter.
7 Top tray jam area
Blinks when there is a jam.
8 Bypass jam area
Blinks when there is a jam.
9 Stacker tray jam area
Blinks when there is a jam or the door is open.
10 HCS80 Keypad
8
2
7
6
10
5
4
3
1
9