DocuColor 7000AP/8000AP Decurler Adjustment
34
Decurler Adjustment
6. In the Decurler E Table Settings Type E window:
a. Enter the following values in the fields by pressing the
arrow buttons:
– Since your job does not require the Downward
Decurler, enter 0% in each of the
Lower
fields.
– In the 2 mm
Upper
field enter 15%. As a result, any
pages with toner area coverage of 0% to 15% will be
sent through this Decurler. Since this job contains toner
area coverage between 11% and 12%, this is the
Decurler that will be used.
– In the 6 mm
Upper
field, enter 100%. Since your job
does not contain any pages with toner area coverage
between 16% and 100%, this Decurler will not be used
on this job.
– In the 10 mm
Upward
field, enter 100%. As a result,
this Decurler will not be used on this job.
NOTE: Remember, all fields have to be considered (Lower and
Upper) when entering Decurler values.
The following screen shows how the values would be entered:
b. To save your Decurler E Table Setting, press
Close
. The
Decurler E Table Setting Type E window closes and the
Decurler E Table Setting window opens.