DocuColor 7000AP/8000AP Decurler Adjustment
26
Decurler Adjustment
6. In the Decurler E Table Settings Type E window:
a. Enter the following values in the fields by pressing the
arrow buttons:
– In the
Lower
10 mm (Heavy curl) field, enter 100%.
This means that all pages with 11% -100% and more
maximum toner area coverage will be sent to the 10
mm downward pressure Decurler. Since your job does
not contain any pages with 11% -100% toner area
coverage, this Decurler will not be used.
– In the
Lower
6 mm (Medium curl) field, enter 10%.
This means that all pages with toner area coverage of
0% to 10% will be sent through the 6 mm downward
pressure Decurler. Since your job contains all pages
with toner area coverage between 4.3% (Cyan) and
6% (Yellow), your job will be sent to the 6 mm
downward pressure Decurler.
– In the remaining fields you must enter values in
descending order, or in equal values less than 10%.
For this exercise we will use 0%, 0%, 0%, and 0%.
NOTE: Remember, all fields have to be considered (Lower and
Upper) when entering Decurler values.
The following screen shows how the values would be entered:
b. To save your Decurler E Table Setting, press
Close
. The
Decurler E Table Setting Type E window closes and the
Decurler E Table Setting window opens.