DocuColor 7000AP/8000AP Decurler Adjustment
18
Decurler Adjustment
6. In the Decurler E Table Settings Type E window:
a. Enter the following values in the fields by pressing the
arrow buttons:
– Since your job shows downward curl, you do not want
to use the Upward Decurler. As a result, in the
Upper
fields you must enter values in descending order, or in
equal values less than 12% (the next value you will
enter). For this exercise we will use 0%, 0% and 0%.
– In the
Lower
2 mm (Light curl) field enter 12%. This
means that all pages with a 0% through 12% toner
area coverage, which includes the Dunn Report
maximum of 10.8%, are sent to the 2 mm downward
Decurler path.
– In the
Lower
6 mm (Medium curl) field, enter 30%.
This means that all pages with 13% to 30% toner area
coverage, which includes the Tulips 28.8%, will be sent
to the 6 mm downward Decurler path.
– In the
Lower
10 mm (Heavy curl) field, enter 50%.
Since none of your job pages have 31% through 50%
toner area coverage, this Decurler will not be used.
NOTE: Entering 50% in the Lower 10 mm (Heavy curl) field
simply illustrates that entering any value at or above 30%
(maximum of 100%) results in the same outcome. Since none
of your job pages have an image density ratio above 30% the
Lower 10 mm Decurler will not be used.
NOTE: Remember, all fields have to be considered (Lower and
Upper) when entering Decurler E Table Settings values.
The following screen shows how the values would be entered: