Xerox D125 User Manual Download Page 267

Page: 267 / 310

5. Place the used staple waste container into a supplied plastic bag.

Note

Do not return a disassembled (used) container to the Customer Support Center.

6. Hold the new staple waste container by the R5 handle area and push it into the

machine.

Note

To prevent injury, do not put your fingers on top of the container.

7. Push R5 until the lock lever moves to the locked position.

8. Close the right cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

18-11

Xerox

D110/D125/D136 Printer

User Guide

Standard Finisher Plus

Summary of Contents for D125























































































































































































































































































































Search results

Summary of Contents for D125

Reviews:

Related manuals for D125

Brands by name

Popular brands

Xerox D125, User Manual

Search results

Summary of Contents for D125

Reviews:

Related manuals for D125

Brands by name

Popular brands