Xerox D125 User Manual Download Page 221

Page: 221 / 310

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

012-239

Cause: The finisher malfunctioned.

Remedy: Perform the following:

Power off/on the machine, and if necessary, resend/restart your print job.

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

012-240

Cause: The finisher malfunctioned.

Remedy: Perform the following:

Power off/on the machine, and if necessary, resend/restart your print job.

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

012-241

Cause: The finisher malfunctioned.

Remedy: Perform the following:

Power off/on the machine, and if necessary, resend/restart your print job.

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

012-243

Cause: The finisher malfunctioned.

Remedy: Perform the following:

Power off/on the machine, and if necessary, resend/restart your print job.

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

012-246

Cause: The finisher malfunctioned.

Remedy: Perform the following:

Power off/on the machine, and if necessary, resend/restart your print job.

If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.

16-41

Xerox

D110/D125/D136 Printer

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for D125























































































































































































































































































































Search results

Summary of Contents for D125

Reviews:

Brands by name

Popular brands

Xerox D125, User Manual

Search results

Summary of Contents for D125

Reviews:

Brands by name

Popular brands