5. Check the fluid level of the Thermal Controller (the fluid level . Use the figure as a
reference for when the fluid level is normal and when more fluid is required to be
added to the Thermal Controller.
Figure 5. Sight gauge of Thermal Controller
The fluid level should always be above this line.
1
Note
The sight gauge is located on the left side of the Thermal Controller (from the front
of the unit).
Action
Result
Contact Xerox for assistance.
Unable to determine fluid
level.
Contact Xerox for assistance.
The fluid level is below the
line shown in
Continue with the next step.
The fluid level is above the
line shown in
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-8
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
