For media ≤ 90 gsm, rotate the Adjuster counter-clockwise to increase tension on
the web. The default setting is to set the Adjuster at the 0 degree position so that
•
the pin is facing upward. For very light weight media, set the Adjuster slightly past
this position.
• For media ≥ 90 gsm, rotate the Adjuster clockwise to decrease the tension on the
web. The default setting is to set the Adjuster at the 90 degree position so that
the pin is facing outward and is in the horizontal position. For very heavy weight
media, set the Adjuster slightly past 90 degrees.
Pin at the 60 degree position
1
Web Tension Adjuster
2
10. Perform one of the following steps depending on if threading the Primary Printer or
the Secondary Printer.
• For Primary Printer: Lock the Infeed Idler Roller into position so that it does not
rotate. Align the notch in the Infeed Idler Roller with the pin and push in the pin.
2-5
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Web Threading Guide
Preparing the Infeed Module for Threading
Summary of Contents for CiPress 325
