D o c u C o lo r 8 0 0 0 / 7 0 0 0 S y s t e m A d m i n is t r a t i o n G u id e
1-9
1 . D e c u r l e r A d j u s t m e n t
Decurler E Table Settings
While the system is programmed to correct for curl under most
conditions, there may be instances where the pre programmed
settings (System Default and Paper Type A - D) may not meet
your curl requirements. Using the Decurler E Table Settings allows
you to enter a percentage of toner area coverage range to help
eliminate curl.
NOTE: The examples that follow are designed to give you an
understanding of programming the Decurler E Table Settings
option to obtain optimal results, but due to various job stock and
environmental conditions the manner in which you achieve the
best results may vary.
The most important aspect for creating Decurler E Table Settings
is determining the percentage of toner area coverage on the
curled paper. A sampling of percentage of toner area coverage on
some typical customer documents follows.
NOTE: The following percentage of toner area coverage
examples have been measured using the particular application’s
tools which created them. If you do not have access to an
application’s tools, which measure percentage of toner area
coverage, make your estimate using the following examples as a
guide. Your estimates will be used when entering Decurler E Table
Settings values, which is explained later in this section.
Percentage of Toner Area Coverage examples
Carousel Horses
Bolivar Ltd.
Dunn Report
Percentage of Toner Area
Coverage per Color
Percentage of Toner Area
Coverage per Color
Percentage of Toner Area
Coverage per Color
Black
30.5% Black
5.4%
Black
10.8%
Magenta
28.1%
Magenta
4.3%
Magenta
8.5%
Cyan
23.8%
Cyan
6.0%
Cyan
8.5%
Yellow
29.5%
Yellow
6.7%
Yellow
7.2%
