16
Use WPS to add the printer to the Wi-Fi network.
Perform the following steps:
1.
Activate WPS from your router, if required. Some routers have a
WPS button on them and others require configuration from the
router’s interface/web page. Refer to your router’s user
documentation.
2.
Push and hold
WPS
button on the printer for 2 seconds.
3.
Wait 2-3 minutes for the blue WPS button to stop flashing.
4.
Wait approximately 1 minute for the printer to obtain a valid IP
address.
5.
Press the red
Stop
button to print a configuration report and verify
that an IP address was obtained.
➢
For more detailed steps to verify the IP address, click
.
Add the Printer to the Wi-Fi Network using WPS
Next
Back to Previous Page
Back to Start
Try a different method to setup WiFi
