Solving Print-Quality Problems
Phaser® 7760 Color Laser Printer
4-10
Incomplete Fusing
Problem
Solution
1.
Verify that the paper you are using is the correct type for the printer. See
Supported Paper
and Media
on page 3-3.
2.
Verify that the paper is properly loaded in the tray, and the correct paper type is selected in
the
Paper Tray Setup
menu. See
Loading Paper
on page 3-9.
If the problem continues:
1.
Do one of the following:
■
Tray 1 (MPT): Remove and re-insert the paper.
■
Tray 2-5: Open and close the selected paper tray. The control panel prompts you to
confirm or change the paper type.
2.
On the control panel, select
Change
, press the
OK
button, and then do one of the
following:
■
Select the correct paper type, and then press the
OK
button.
■
Select the next heavier type of paper, and then press the
OK
button.
Note:
Paper types from lightest to heaviest are: Plain Paper, Heavy Plain Paper, Thin Card
Stock, Thick Card Stock, Extra Thick Card Stock.
Toner appears to be missing from the print, or rubs off easily.