Xerox 7760DN - Phaser Color Laser Printer User Manual Download

Page: 127 / 158

Clearing Paper Jams

Phaser® 7760 Color Laser Printer

6-7

Jam at Tray 1 (MPT)

Follow these steps to clear the jam.

Remove paper from Tray 1 (MPT). Confirm that all paper fragments are removed.

Remove the jammed paper from Tray 1 (MPT). Confirm that all paper fragments are
removed.

If you did not find paper in Step 2, push up the latch on the left side of the printer to open
Left Door A.

Warning:

Use caution, components behind the left door may be hot.

7760-046

7760-047

7760-010

Summary of Contents for 7760DN - Phaser Color Laser Printer































































































































































Search results

Summary of Contents for 7760DN - Phaser Color Laser Printer

Reviews:

Related manuals for 7760DN - Phaser Color Laser Printer

Brands by name

Popular brands

Xerox 7760DN - Phaser Color Laser Printer, User Manual

Search results

Summary of Contents for 7760DN - Phaser Color Laser Printer

Reviews:

Related manuals for 7760DN - Phaser Color Laser Printer

Brands by name

Popular brands