Solving Print-Quality Problems
Phaser® 7400 Color Printer
4-15
Fusing Is Incomplete or Toner Is Flaking
Problem
Toner appears to be pulled off the print, or is easy to rub off.
Solution
■
Verify that the paper you are using is the correct type for the printer. See
■
Verify that the paper is properly loaded in the tray, and the correct paper type is selected in
the
Paper Tray Setup
menu. See
If the problem persists:
1.
On the control panel, select
Paper Tray Setup
, and then press the
OK
button.
2.
Select the tray you are using, and then press the
OK
button.
3.
Select
Change Setup
, and then press the
OK
button.
4.
Select
Special
as the paper type, and then press the
OK
button.
5.
Select
Continue
, and then press the
OK
button.
6.
Select a paper type that is heavier than the current tray setting, and then press the
OK
button.
Note:
Special paper types from lightest to heaviest are: Light Paper, Medium Light Paper,
Medium Paper, Medium Heavy Paper, Heavy Paper, Thin Card Stock, Thick Card Stock,
Extra Thick Card Stock.
7.
If prompted, select the appropriate paper size, and then press the
OK
button.
7400-211
