Xerox 7400DN - Phaser Color LED Printer, User Manual

Page: 89 / 196

Solving Print-Quality Problems
Phaser® 7400 Color Printer
4-5
Solving Print-Quality Problems
This section includes:
■
Light or Dark Lines or Smudges in One Color on page 4-5
■ Dark Lines, Smudges, or Streaks Through All Colors on page 4-9
■
All Colors Are Too Light or Too Dark on page 4-12
■ Repeating Defects on page 4-13
■
Print Image Is Offset on page 4-14
■ Fusing Is Incomplete or Toner Is Flaking on page 4-15
■
Color Misregistration on page 4-16
■ Printed Area Does Not Fit on the Paper or Margins Are Incorrect on page 4-20
See also:
Knowledge Base at www.xerox.com/office/7400support
Light or Dark Lines or Smudges in One Color
Problem
Print a copy of the color test pages to determine whether the problem is in one color or more
than one color:
1. On the control panel, select Troubleshooting , and then press the OK button.
2. Select Print Quality Problems , and then press the OK button.
3. Select Color Test Pages , and then press the OK button to print the test pages.
■ If the problem appears in one color on the test pages, continue with the solution in this
section.
■ If the problem appears in more than one color on the test pages, see Dark Lines,
Smudges, or Streaks Through All Colors on page 4-9.
Thin, light or white lines appear in only
one color.
Thin, dark lines or smudges appear in
only one color when a light color is
faded or blended with black.
Downloaded From ManualsPrinter.com Manuals