Xerox 701P41586, User Manual

Page: 15 / 22

7
1.2 HDI Installation
1.2
HDI Installation
The following example is to configure a local non-system plotter and network non-
system plotter.
Copy the Driver
1
Un
zip the driver file. This will create subdirectories for 2000, 2000i, 2002
and 2004.
Installing and Setting up the Driver for Local Plotter
1
Open the AutoDesk Plotter Manager.
2
In the AutoDesk Plotter Manager, double-click the Add-a-Plotter wizard.
3
In the Add-a-Plotter wizard, read the Introduction, and then choose Next to
advance to the Add Plotter - Begin page.
4
On the Add Plotter - Begin page, choose My Computer. Choose Next.
5
Choose Have Disk to locate the HIF file on that driver disk, and install the
driver supplied with your plotter.
6
On the Add Plotter - Plotter Model page, select a manufacturer and model.
Choose Next.
•
(Optional) The Import PCP or PC2 screen enables you to use configuration
information from a PCP or PC2 file created with an earlier version of
AutoCAD.
7
On the Add Plotter - Ports page, select the port to use when plotting. Choose
Next. The ports available for the specified device are displayed.