11
1.3 Driver Operation Reference
Paper size:
Select paper size. For this driver, paper size must be selected here,
not at “Paper Size and Orientation” in the “Print/Plot Configuration” dialog
box.
Length:
When “Custom size” is selected at “Paper Size”, set its length can be
set in integral value in 1mm increments.
Set margin:
Set a margin in the range of 0 to 10mm on each side of paper.
This margin reduces the maximum plotting area.
Fill:
Set a solid or halftone (dither) pattern for filling graphics or TrueType
fonts.
Select resolution:
Select resolution for raster (picture image) output.
Image correction:
Click here to open the sub-dialog for raster (picture image)
gamma correction.
Versions...:
Version of this driver
Red print:
Not supported by this model.
Red-specified pen number:
Not supported by this model.
Label:
Enter a message to add as a drawing label. Only alphanumeric
characters (ASCII codes) can be used. The maximum number of characters is
64.
Number of Copies:
Specify the number of copies (1 to 99).
Select generated data:
Select a plotter language (RTL/GL2/VCGL+MMR) to
generate the data. “VCGL+MMR” is not supported by some of the plotter
models.
Options...:
Click the “Options...” button to open the dialog box to set optional
functions unique to the selected plotter model.
6
Click the [Options...] button to open the dialog box. Several functions are not
supported by some plotter models (grayed out options are not supported).
Folder Options
Program:
Select Folder Bypass or Programs 1 through 20.
Summary of Contents for 701P41586
