Xerox 701P40016, Print Manual

Page: 58 / 131

Printing a job using the DocuSP web interface Guide to Printing Using Xerox Production Print Services
4-20
Example: If a color such as a pastel is below a threshold
level, it may print as no color if a contrast value of 100 is
specified.
• [Saturation]: Specifies the amount of color that is used to
print the output.
– A value of -100 causes the output to appear grayscale.
– A value of 100 prints the output to appear in all bright
colors.
– A value of 0 (zero) causes no change to the output.
NOTE: The output resulting from these selections may be
affected by the content of the original image.
Color Cast
In this section you can select a color cast that will be applied to
all input colors. You can adjust the following color ranges:
• Cyan – Red: -100 specifies the maximum cyan cast that is
supported by the system, and 100 specifies the maximum red
cast.
• Magenta – Green: -100 specifies the maximum magenta
cast that is supported by the system, and 100 specifies the
maximum green cast.
• Yellow – Blue: -100 specifies the maximum yellow cast that
is supported by the system, and 100 specifies the maximum
blue cast.
Setting Expert Color parameters
The Expert Color Settings window allows you to make selections
to enhance the color quality within your document and to specify
source color profiles and output color parameters. To use the
expert color fields, follow these steps:
1. On the Job Submission window, select [Expert Color] in the
[Color Features] section.
2. Make all desired changes and specifications in the fields that
are described in the following sections.
3. When finished making expert color selections, scroll to the
top of the Expert Color Settings window and do one of the
following: