Job ticket options
Guide to Printing Using Xerox Production Print Services
9-34
Saved jobs may be reprinted in one of the following ways:
•
Without changing any of the saved job ticket parameters
•
Changing one or more saved job ticket parameters
NOTE: Different network software modifies the reprint job name
to fit various naming conventions. In most cases, in order to
reprint a job from a DOS or Windows client, the Save
Preferences on the DocuSP controller must have the File Server
Type set to [PC]. Refer to your Print Service Operator Guide for
more information.
Reprinting without changing the job ticket parameters
When the job is saved, a job ticket is created and saved also. All
of the parameters that were set in the job ticket when the job was
saved are set in the saved job ticket. When the job ticket is
saved, a .jt extension is added to the end of the file name. If the
[Save Preferences] field is set to [PC File Server Type], the job
decomp.ps is saved as DECOMP.jt.
1. In the [Document] field on the XDS window, enter or browse
to locate and display the name of the document that will be
reprinted. If the save directory is the default save location that
was set at the DocuSP controller, then entering the source
directory path is not necessary. If a source directory that is
different from the default save directory was selected, enter
the directory path to the save location.
NOTE: The source directory and file names are case
sensitive and must be identical to the name of the file that
was submitted to be saved. Note that some network gateway
software changes the case to all lowercase or all uppercase.
2. Select the [Reprint] check box. A message appears,
informing you that the job ticket settings that were saved with
the job will be used.
3. In the message window, select [OK] to proceed with
reprinting.
4. Select [Setup] to open the Setup window.
NOTE: When [Reprint] is selected in the Xerox Document
Submission window, all of the job ticket parameters are set to
either the system defaults or to [Printer Default].
5. Ensure that the number of copies that will be printed matches
the number of copies that were specified for the reprint job,
then select [OK].
Summary of Contents for 701P40016
Page 9: ...TABLE OF CONTENTS GUIDE TO PRINTING USING XDS ix...
Page 10: ...TABLE OF CONTENTS x GUIDE TO PRINTING USING XDS...
Page 16: ...Introduction Guide to Printing Using Xerox Production Print Services 1 6...
Page 84: ...Using Command Line Client Guide to Printing Using Xerox Production Print Services 6 12...
