Xerox 6100BD - Phaser Color Laser Printer, System Manual

Page: 22 / 140

Gateway and Network Configuration
1-8 System Guide
Printer and job messages
SNMP can broadcast messages about the printer and the
jobs on the system. Printer messages may announce that the
printer is idle, printing, or out of paper. Job messages
announce that jobs are pending, processing, or completed.
Other job-related information may include the job owners
name, the job quantity, the job identifier, etc.
The information that is displayed at an SNMP Manager may
not always reflect the exact status of a job or printer on the
DocuSP Controller. Those Managers that do not support
loading of Management Information Bases (MIBs) only
displays the printer and job status that they support.
NOTE: Forwarding is not a job state that is broadcast by the
controller; therefore, job forwarding information is not
displayed by the SNMP job managers.
AppleTalk gateway configuration
In Gateways, using the AppleTalk tab the administrator can
enable of disable the protocol. If the protocol is enabled, the
administrator can also select a default queue set for
Appletalk.
Queue server options
In Gateways using the Queue Server tab, the administrator
has the option to enable or disable NetWare and to define a
Preferred Server Name. This entry field allows the
administrator an easy method to directly point to a replica or
NDS server name.
NOTE: It is recommended to set this after the first connect
attempt has been made since the Preferred Server Name
should be automatically available under normal conditions.
NetWare gateway configuration
In Gateways using the NetWare tab, the administrator can
configure the NetWare Network automatically or manually. If
the automatic mode is selected, a wizard steps the
administrator through the configuration of the Novell Server
and the NetWare Printer queues for DocuSP.