Xerox 4215, Installation Planning Manual, Page: 56 / 83

C. Checklists
This appendix contains perforated checklists that help you plan
for the installation of your Xerox 4215/MRP or 4219/MRP Mid
Range Systems Printer.
Use the information in the following chapters and appendices to
complete the checklists as noted:
•
“Preinstallation”—assists in the completion of checklists 1 and
2.
•
“Preparing the installation checklists”—assists in the
completion of checklists 3 through 6.
•
“Ordering fonts, options, and supplies”—assists in the
completion of checklist 7.
Your Xerox sales representative will help you as needed to
complete the checklists. Each checklist shows the 4215/MRP and
4219/MRP default settings in bold typeface.
On installation day, give the completed checklists to your Xerox
service representative so your printer can be configured to your
specifications.
Checklist 1 “Site preparation” helps you physically prepare the installation
site by helping you figure out your environment, space and
access requirements, electrical supply, and interface devices.
Checklist 2 “Twinax and Coax interface configuration” lists the possible
options that can be set for the 4215/MRP and 4219/MRP Twinax
and Coax interface cards.
Checklist 3 “General Setup” helps you decide on the input and output
features of the printer.
Checklist 4 “Setup printer—PCL 5 Setup” helps you establish the default
parameters for printing PCL jobs.
Checklist 5 “Setup Printer—PostScript Resolution, Print Enhancement,
Communications Priority, Panel Security” lists other options for
setting the print behavior of the 4215/MRP and 4219/MRP.
Checklist 6 “Setup Interface—Parallel, Serial, Other I/O” lists the default
parameters for the standard 4215/MRP and 4219/MRP interfaces.
Checklist 7 “Supplies” provides a record form to record the dates to order
the supplies required for your installation site.
XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE C-1