Xerox 4215, Installation Planning Manual, Page: 25 / 83

PREINSTALLATION
Space requirements
The following space requirements should be considered when
planning a location for the printer.
Figure 3-1 is a top view of the printer. These are the minimum
space requirements needed for operation and maintenance.
Front and right area must provide standing room access to allow
for clearance of paper jams and servicing of the printer.
The height requirement from the floor to the nearest overhead
obstruction within the specified space is a minimum of 78 inches
(198 cm).
Figure 3-1. Space requirements for operation (top view)
Electrical requirements
Table 3-1. Electrical requirments
Location category Voltage Current/power
U.S. and Canada 115, 60Hz 8 Amps
International 220/240, 50Hz 4 Amps
Voltage to the printer should not vary by more than 10 percent.
N
Note: Momentary loss of power causes loss of downloaded
fonts in random access memory (RAM) and places the printer in
standby mode.
3-2 XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE