Xerox 4213, Programmer'S Reference Manual

Page: 90 / 246

XES COMMAND LANGUAGE MODE
Tabs Clear Vertical
Purpose Clears all vertical tab settings in a job.
Syntax
E
e
e
Instruction to clear all vertical tab settings.
Where to place it Anywhere before the place in the job at which the current tab
settings are to be cleared.
More If vertical tabs are cleared and no new ones are set, the printer
considers any vertical tab character encountered in the document
as a page end.
Justifying and centreing between margins
About justification
To justify text between margins, use the Justification command.
This command is cleared with the Justification Stop Command.
About centreing
To centre text between margins, use the Centre command.
A Centre command overrides a Justification Start command.
Once you insert a Centre command, a line will not justify, even
with a Justification Start command.
Any spaces or tabs placed on a line that has a Centre command
will be included in the text to be centred.
Do not try to centre a line by moving it to the centre of the host
screen then following with the Centre command. The spaces
from the left margin will be included as if they were characters
and your text will not be centred.
2-52 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE