Xerox 4213, Programmer'S Reference Manual

Page: 140 / 246

XES COMMAND LANGUAGE MODE
Nongraphic line commands (Line Draw X and Line Draw Y)
cannot contain fill patterns even when defined within the
boundaries of a graphic window. Notice in figure 2-33 that the
pattern is contained only at the boundaries of the closed graphic
images.
Example Figure 2-33 is created in the following manner:
•
A graphic window is defined with the Graphic Window
command.
•
Line Draw X and Line Draw Y commands create the inner
rectangle. This is a nongraphic image.
•
A circle is drawn with the Graphic Arc command.
•
A line is drawn through the circle with Graphic Line
command. Note that it is defined so that it breaks as it
passes through the circle.
•
The outside rectangle is drawn with Graphic Box.
•
The Graphic Fill command selects pattern 17 and defines one
seed point between the inside of the graphic box and the
outside of the graphic circle.
E
gw,2;500,3000,700,700
L
E x553,2947,594,3 L
E x553,2350,594,3 L
E
y553,2350,597,3
L
E y1147,2350,597,3 L
E ga5;350,350,100,0,360
L
E
gl5;350,3,350,250
L
E gl15;350,450,350,697 L
E
gb5;3,3,697,697
L
E gf17;150,150 L
2-102 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE